CONELOG® VARIO SR PROSTHETIC COMPONENTS*
FOR OCCLUSAL SCREW-RETAINED CROWN, BRIDE AND BAR RESTORATIONS
The CONELOG® Vario SR prosthetic components can be used to fabricate occlusally screw-retained crown, bridge and bar structures in the maxilla and mandible for the restoration of CONELOG® SCREW-LINE implants.
CONELOG® Vario SR abutments and Vario SR prosthetic components consist of prefabricated products precisely matched to one another that standardize the clinical and technical procedure. The result is a lower workload and considerable time savings for the practice and laboratory.
|
|
 |
PROSTHETIC COMPONENTS
CONELOG® Vario SR prosthetic components contain color-coded CONELOG® Vario SR abutments in straight and in 20° and 30° angled versions, Vario SR impression caps, open/closed tray, Vario SR analogs, burn-out Vario SR plastic copings, Vario SR titanium caps for temporary and final restorations, titanium bases for bar for laser welding and a yellow anodized Vario SR prosthetic screw.
|
|
|
|
|
|
FOR ANATOMICALLY CHALLENGING AREAS
20° and 30° angled CONELOG® Vario SR abutments are available for bridging large implant axis divergences. For reduced bone supply with anatomical structures positioned unfavorably for implantation, the implants can be placed in the distal direction and an appropriate prosthetic restoration created. Optimum use of the bone supply is ensured.
|
|
 |
SELECTION AND INSERTION OF ANGLED CONELOG® VARIO SR ABUTMENTS WITH THE ALIGNING TOOLS 20°/30°
After inserting the implant, the Vario SR 20° and 30° aligning tools can be used when multiple CONELOG® implants are placed to check the respective insertion direction and alignment of the implant grooves before inserting the CONELOG® Vario SR abutments. The respective aligning tool is simply placed over the insertion post attached to the implant. If necessary, the user can slightly adjust the alignment of the grooves of the inner implant configuration.
|
* available from summer 2011
|
 |