CAMLOG^® VARIO SR PROSTHETIC COMPONENTS

For occlusally screw-retained crown, bridge and bar restorations The CAMLOG® Vario SR prosthetic components can be used to fabricate occlusally screw-retained crown, bridge and bar constructions in the maxilla and mandible on CAMLOG® SCREW-LINE and CAMLOG® ROOT-LINE implants. CAMLOG® Vario SR abutments and Vario SR prosthetic components consist of prefabricated components precisely matched to one another that standardize the clinical and technical procedure. The result is a lower workload and considerable time savings for the practice and laboratory.
Prosthetic Components CAMLOG® Vario SR prosthetic components contain color-coded CAMLOG® Vario SR abutments in straight and in 20° and 30° angled version, Vario SR impression caps, open/closed tray, Vario SR analogs, burn-out Vario SR plastic copings, Vario SR titanium caps for temporary and final restorations, titanium Vario SR Bases for bars for laser welding and a yellow anodized Vario SR prosthetic screw.
ANATOMICALLY CHALLENGING AREAS 20° and 30° angled CAMLOG® Vario SR abutments are available for bridging large implant axis divergences. Where bone supply is reduced and anatomical structures are unfavorable for implantation, the implants can be placed in the distal direction and an appropriate prosthetic restoration can be created. Optimum use of the bone supply is thus ensured.

SELECTING ANGLED CAMLOG® VARIO SR ABUTMENTS WITH THE ALIGNING TOOLS 20°/30°

After inserting the implant, the Vario SR 20° and 30° aligning tools can be used when multiple implants are placed to check the respective insertion direction and alignment of the implant grooves before inserting the CAMLOG® Vario SR abutments. The respective aligning tool is simply placed over the insertion post attached to the implant. If necessary, the user can slightly adjust the alignment of the grooves of the inner implant configuration.